And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:7.000
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.503
And
I accept adding "cowsay" to Additional Software
6.665
And
Additional Software is correctly configured for package "cowsay"
1.016
And
I shutdown Tails and wait for the computer to power off
7.559
And
I start Tails from USB drive "__internal" with network unplugged
1:11.011
And
I enable persistence
14.066
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.106
And
I log in to a new session
42.421
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.304
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.093
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.292
And
available upgrades have been checked
1.228
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.185
And
I can open the Additional Software configuration window from the notification
4.560
And
I shutdown Tails and wait for the computer to power off
2:3.699
And
I start Tails from USB drive "__internal" with network unplugged
1:3.749
And
I enable persistence
12.958
And
I configure APT to prefer an old version of cowsay
0.050
And
I log in to a new session
42.645
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.143
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102