And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:0.113
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.162
And
I accept adding "cowsay" to Additional Software
5.257
And
Additional Software is correctly configured for package "cowsay"
0.756
And
I shutdown Tails and wait for the computer to power off
7.750
And
I start Tails from USB drive "__internal" with network unplugged
43.239
And
I enable persistence
7.921
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
12.957
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.376
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.060
And
available upgrades have been checked
1.215
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.353
And
I can open the Additional Software configuration window from the notification
2.960
And
I shutdown Tails and wait for the computer to power off
22.504
And
I start Tails from USB drive "__internal" with network unplugged
43.739
And
I enable persistence
7.670
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
14.128
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.436
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092