And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.157
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.396
And
I accept adding "cowsay" to Additional Software
5.575
And
Additional Software is correctly configured for package "cowsay"
0.783
And
I shutdown Tails and wait for the computer to power off
7.605
And
I start Tails from USB drive "__internal" with network unplugged
41.689
And
I enable persistence
7.367
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
11.829
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.337
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.051
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.699
And
I can open the Additional Software configuration window from the notification
2.804
And
I shutdown Tails and wait for the computer to power off
17.856
And
I start Tails from USB drive "__internal" with network unplugged
40.734
And
I enable persistence
7.904
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
10.594
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.405
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079