And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:30.659
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.463
And
I accept adding "cowsay" to Additional Software
5.203
And
Additional Software is correctly configured for package "cowsay"
0.797
And
I shutdown Tails and wait for the computer to power off
7.894
And
I start Tails from USB drive "__internal" with network unplugged
46.360
And
I enable persistence
7.644
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
12.752
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.349
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.196
And
available upgrades have been checked
1.135
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.271
And
I can open the Additional Software configuration window from the notification
2.866
And
I shutdown Tails and wait for the computer to power off
18.025
And
I start Tails from USB drive "__internal" with network unplugged
43.639
And
I enable persistence
7.930
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
14.354
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.710
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.048
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108