And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.990
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.982
And
I accept adding "cowsay" to Additional Software
4.165
And
Additional Software is correctly configured for package "cowsay"
0.749
And
I shutdown Tails and wait for the computer to power off
7.482
And
I start Tails from USB drive "__internal" with network unplugged
41.027
And
I enable persistence
7.713
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
11.828
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.319
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.060
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.782
And
I can open the Additional Software configuration window from the notification
2.875
And
I shutdown Tails and wait for the computer to power off
13.684
And
I start Tails from USB drive "__internal" with network unplugged
42.443
And
I enable persistence
8.175
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
12.215
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.406
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.052
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064