And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.013
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.694
And
I accept adding "cowsay" to Additional Software
3.753
And
Additional Software is correctly configured for package "cowsay"
0.669
And
I shutdown Tails and wait for the computer to power off
4.391
And
I start Tails from USB drive "__internal" with network unplugged
36.725
And
I enable persistence
6.868
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
9.427
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.249
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.017
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.059
And
I can open the Additional Software configuration window from the notification
2.718
And
I shutdown Tails and wait for the computer to power off
22.875
And
I start Tails from USB drive "__internal" with network unplugged
37.790
And
I enable persistence
6.620
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.504
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.500
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060