And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.146
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.280
And
I accept adding "cowsay" to Additional Software
3.787
And
Additional Software is correctly configured for package "cowsay"
0.583
And
I shutdown Tails and wait for the computer to power off
8.008
And
I start Tails from USB drive "__internal" with network unplugged
36.870
And
I enable persistence
6.216
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.861
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.017
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.442
And
I can open the Additional Software configuration window from the notification
2.584
And
I shutdown Tails and wait for the computer to power off
22.203
And
I start Tails from USB drive "__internal" with network unplugged
36.418
And
I enable persistence
5.457
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.368
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.035
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067