And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.128
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.765
And
I accept adding "cowsay" to Additional Software
4.749
And
Additional Software is correctly configured for package "cowsay"
0.708
And
I shutdown Tails and wait for the computer to power off
4.382
And
I start Tails from USB drive "__internal" with network unplugged
37.179
And
I enable persistence
6.913
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
10.466
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.014
And
available upgrades have been checked
2.173
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.583
And
I can open the Additional Software configuration window from the notification
2.616
And
I shutdown Tails and wait for the computer to power off
17.282
And
I start Tails from USB drive "__internal" with network unplugged
36.641
And
I enable persistence
7.043
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.343
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071