And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.501
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.564
And
I accept adding "cowsay" to Additional Software
3.722
And
Additional Software is correctly configured for package "cowsay"
0.640
And
I shutdown Tails and wait for the computer to power off
8.133
And
I start Tails from USB drive "__internal" with network unplugged
36.450
And
I enable persistence
6.534
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.634
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.013
And
available upgrades have been checked
2.179
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.429
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
22.161
And
I start Tails from USB drive "__internal" with network unplugged
35.444
And
I enable persistence
5.390
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.617
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.525
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059