And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.001
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.240
And
I accept adding "cowsay" to Additional Software
4.949
And
Additional Software is correctly configured for package "cowsay"
0.712
And
I shutdown Tails and wait for the computer to power off
7.932
And
I start Tails from USB drive "__internal" with network unplugged
38.707
And
I enable persistence
6.985
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
10.229
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.235
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.015
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.536
And
I can open the Additional Software configuration window from the notification
2.540
And
I shutdown Tails and wait for the computer to power off
23.357
And
I start Tails from USB drive "__internal" with network unplugged
41.402
And
I enable persistence
6.596
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.579
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.241
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.069
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074