And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.508
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.156
And
I accept adding "cowsay" to Additional Software
4.818
And
Additional Software is correctly configured for package "cowsay"
0.695
And
I shutdown Tails and wait for the computer to power off
8.348
And
I start Tails from USB drive "__internal" with network unplugged
39.138
And
I enable persistence
7.264
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
13.027
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.032
And
available upgrades have been checked
2.181
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.467
And
I can open the Additional Software configuration window from the notification
2.542
And
I shutdown Tails and wait for the computer to power off
23.318
And
I start Tails from USB drive "__internal" with network unplugged
39.216
And
I enable persistence
7.257
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.255
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.099
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061