And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.632
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.510
And
I accept adding "cowsay" to Additional Software
3.654
And
Additional Software is correctly configured for package "cowsay"
0.601
And
I shutdown Tails and wait for the computer to power off
8.087
And
I start Tails from USB drive "__internal" with network unplugged
36.307
And
I enable persistence
5.789
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.366
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.014
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.446
And
I can open the Additional Software configuration window from the notification
2.508
And
I shutdown Tails and wait for the computer to power off
18.447
And
I start Tails from USB drive "__internal" with network unplugged
35.857
And
I enable persistence
6.664
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
9.869
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055