And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.216
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.705
And
I accept adding "cowsay" to Additional Software
5.043
And
Additional Software is correctly configured for package "cowsay"
0.660
And
I shutdown Tails and wait for the computer to power off
8.003
And
I start Tails from USB drive "__internal" with network unplugged
39.650
And
I enable persistence
7.823
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
12.190
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.107
And
I prepare the Additional Software upgrade process to fail
0.099
And
the network is plugged
0.051
And
available upgrades have been checked
2.214
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.640
And
I can open the Additional Software configuration window from the notification
2.746
And
I shutdown Tails and wait for the computer to power off
17.925
And
I start Tails from USB drive "__internal" with network unplugged
40.900
And
I enable persistence
7.227
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
14.183
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059