And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.276
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.568
And
I accept adding "cowsay" to Additional Software
5.113
And
Additional Software is correctly configured for package "cowsay"
0.615
And
I shutdown Tails and wait for the computer to power off
4.170
And
I start Tails from USB drive "__internal" with network unplugged
38.014
And
I enable persistence
6.690
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
11.177
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.013
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.534
And
I can open the Additional Software configuration window from the notification
2.566
And
I shutdown Tails and wait for the computer to power off
17.273
And
I start Tails from USB drive "__internal" with network unplugged
37.163
And
I enable persistence
6.649
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.630
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067