And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.322
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.735
And
I accept adding "cowsay" to Additional Software
3.621
And
Additional Software is correctly configured for package "cowsay"
0.610
And
I shutdown Tails and wait for the computer to power off
7.993
And
I start Tails from USB drive "__internal" with network unplugged
36.400
And
I enable persistence
5.451
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.982
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.534
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.018
And
available upgrades have been checked
2.151
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.542
And
I can open the Additional Software configuration window from the notification
2.495
And
I shutdown Tails and wait for the computer to power off
8.182
And
I start Tails from USB drive "__internal" with network unplugged
36.069
And
I enable persistence
5.467
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.635
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063