And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.304
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.044
And
I accept adding "cowsay" to Additional Software
3.744
And
Additional Software is correctly configured for package "cowsay"
0.733
And
I shutdown Tails and wait for the computer to power off
4.035
And
I start Tails from USB drive "__internal" with network unplugged
36.861
And
I enable persistence
6.503
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.421
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.017
And
available upgrades have been checked
2.148
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.466
And
I can open the Additional Software configuration window from the notification
2.518
And
I shutdown Tails and wait for the computer to power off
22.432
And
I start Tails from USB drive "__internal" with network unplugged
36.876
And
I enable persistence
5.482
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.201
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054