And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.986
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.253
And
I accept adding "cowsay" to Additional Software
3.546
And
Additional Software is correctly configured for package "cowsay"
0.603
And
I shutdown Tails and wait for the computer to power off
8.091
And
I start Tails from USB drive "__internal" with network unplugged
36.126
And
I enable persistence
5.948
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.439
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.016
And
available upgrades have been checked
3.306
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.430
And
I can open the Additional Software configuration window from the notification
2.577
And
I shutdown Tails and wait for the computer to power off
18.485
And
I start Tails from USB drive "__internal" with network unplugged
36.143
And
I enable persistence
6.725
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.496
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072