And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.991
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.537
And
I accept adding "cowsay" to Additional Software
4.912
And
Additional Software is correctly configured for package "cowsay"
0.651
And
I shutdown Tails and wait for the computer to power off
8.432
And
I start Tails from USB drive "__internal" with network unplugged
40.215
And
I enable persistence
7.076
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
11.907
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.323
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.217
And
available upgrades have been checked
1.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.184
And
I can open the Additional Software configuration window from the notification
2.613
And
I shutdown Tails and wait for the computer to power off
17.814
And
I start Tails from USB drive "__internal" with network unplugged
38.759
And
I enable persistence
6.762
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
13.032
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.074
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072