And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.914
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.535
And
I accept adding "cowsay" to Additional Software
3.787
And
Additional Software is correctly configured for package "cowsay"
0.593
And
I shutdown Tails and wait for the computer to power off
7.903
And
I start Tails from USB drive "__internal" with network unplugged
35.451
And
I enable persistence
5.412
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.734
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.014
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.430
And
I can open the Additional Software configuration window from the notification
2.502
And
I shutdown Tails and wait for the computer to power off
16.972
And
I start Tails from USB drive "__internal" with network unplugged
36.203
And
I enable persistence
5.781
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.212
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.476
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075