And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.609
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.493
And
I accept adding "cowsay" to Additional Software
3.644
And
Additional Software is correctly configured for package "cowsay"
0.543
And
I shutdown Tails and wait for the computer to power off
7.845
And
I start Tails from USB drive "__internal" with network unplugged
36.144
And
I enable persistence
5.576
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.706
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.013
And
available upgrades have been checked
2.175
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.415
And
I can open the Additional Software configuration window from the notification
2.484
And
I shutdown Tails and wait for the computer to power off
22.157
And
I start Tails from USB drive "__internal" with network unplugged
36.037
And
I enable persistence
5.592
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.813
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062