And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.525
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.129
And
I accept adding "cowsay" to Additional Software
3.717
And
Additional Software is correctly configured for package "cowsay"
0.634
And
I shutdown Tails and wait for the computer to power off
7.953
And
I start Tails from USB drive "__internal" with network unplugged
35.523
And
I enable persistence
5.626
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
9.288
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.247
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.017
And
available upgrades have been checked
1.150
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.530
And
I can open the Additional Software configuration window from the notification
2.520
And
I shutdown Tails and wait for the computer to power off
17.311
And
I start Tails from USB drive "__internal" with network unplugged
35.585
And
I enable persistence
6.456
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.659
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067