And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.446
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.079
And
I accept adding "cowsay" to Additional Software
4.933
And
Additional Software is correctly configured for package "cowsay"
0.702
And
I shutdown Tails and wait for the computer to power off
8.006
And
I start Tails from USB drive "__internal" with network unplugged
37.605
And
I enable persistence
6.168
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.725
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.017
And
available upgrades have been checked
2.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.494
And
I can open the Additional Software configuration window from the notification
2.644
And
I shutdown Tails and wait for the computer to power off
13.256
And
I start Tails from USB drive "__internal" with network unplugged
37.534
And
I enable persistence
5.326
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
10.371
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.641
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062