And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.898
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.114
And
I accept adding "cowsay" to Additional Software
4.957
And
Additional Software is correctly configured for package "cowsay"
0.964
And
I shutdown Tails and wait for the computer to power off
7.130
And
I start Tails from USB drive "__internal" with network unplugged
40.330
And
I enable persistence
6.992
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
12.608
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.018
And
available upgrades have been checked
2.186
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.530
And
I can open the Additional Software configuration window from the notification
2.562
And
I shutdown Tails and wait for the computer to power off
14.198
And
I start Tails from USB drive "__internal" with network unplugged
41.990
And
I enable persistence
6.451
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
13.322
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.244
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074