And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.735
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.854
And
I accept adding "cowsay" to Additional Software
3.672
And
Additional Software is correctly configured for package "cowsay"
0.733
And
I shutdown Tails and wait for the computer to power off
8.072
And
I start Tails from USB drive "__internal" with network unplugged
37.061
And
I enable persistence
5.530
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.455
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.018
And
available upgrades have been checked
2.152
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.451
And
I can open the Additional Software configuration window from the notification
2.507
And
I shutdown Tails and wait for the computer to power off
13.214
And
I start Tails from USB drive "__internal" with network unplugged
37.876
And
I enable persistence
6.698
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
9.824
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.568
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.082
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053