And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.141
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.384
And
I accept adding "cowsay" to Additional Software
4.860
And
Additional Software is correctly configured for package "cowsay"
0.691
And
I shutdown Tails and wait for the computer to power off
4.486
And
I start Tails from USB drive "__internal" with network unplugged
38.863
And
I enable persistence
7.197
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
11.037
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.222
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.014
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.075
And
I can open the Additional Software configuration window from the notification
2.748
And
I shutdown Tails and wait for the computer to power off
17.447
And
I start Tails from USB drive "__internal" with network unplugged
38.437
And
I enable persistence
6.513
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.824
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066