And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.641
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.889
And
I accept adding "cowsay" to Additional Software
4.842
And
Additional Software is correctly configured for package "cowsay"
0.944
And
I shutdown Tails and wait for the computer to power off
8.039
And
I start Tails from USB drive "__internal" with network unplugged
38.101
And
I enable persistence
6.674
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
10.275
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.527
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.014
And
available upgrades have been checked
2.160
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.450
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
17.535
And
I start Tails from USB drive "__internal" with network unplugged
37.113
And
I enable persistence
6.445
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.868
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066