And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.553
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.592
And
I accept adding "cowsay" to Additional Software
4.823
And
Additional Software is correctly configured for package "cowsay"
0.605
And
I shutdown Tails and wait for the computer to power off
4.109
And
I start Tails from USB drive "__internal" with network unplugged
37.417
And
I enable persistence
6.539
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.258
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.016
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.060
And
I can open the Additional Software configuration window from the notification
2.605
And
I shutdown Tails and wait for the computer to power off
4.304
And
I start Tails from USB drive "__internal" with network unplugged
37.805
And
I enable persistence
6.897
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.705
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.069
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065