And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.996
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.771
And
I accept adding "cowsay" to Additional Software
3.771
And
Additional Software is correctly configured for package "cowsay"
0.625
And
I shutdown Tails and wait for the computer to power off
4.350
And
I start Tails from USB drive "__internal" with network unplugged
37.914
And
I enable persistence
6.730
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
10.242
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.230
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.019
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.028
And
I can open the Additional Software configuration window from the notification
2.569
And
I shutdown Tails and wait for the computer to power off
22.525
And
I start Tails from USB drive "__internal" with network unplugged
37.351
And
I enable persistence
5.747
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.625
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.494
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063