And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.621
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.391
And
I accept adding "cowsay" to Additional Software
4.991
And
Additional Software is correctly configured for package "cowsay"
0.707
And
I shutdown Tails and wait for the computer to power off
8.217
And
I start Tails from USB drive "__internal" with network unplugged
39.199
And
I enable persistence
7.163
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
10.418
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.246
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.037
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.018
And
I can open the Additional Software configuration window from the notification
2.585
And
I shutdown Tails and wait for the computer to power off
17.980
And
I start Tails from USB drive "__internal" with network unplugged
38.768
And
I enable persistence
6.874
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
12.001
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.286
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.079
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104