And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.459
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.663
And
I accept adding "cowsay" to Additional Software
3.749
And
Additional Software is correctly configured for package "cowsay"
0.556
And
I shutdown Tails and wait for the computer to power off
8.094
And
I start Tails from USB drive "__internal" with network unplugged
36.042
And
I enable persistence
5.738
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
8.992
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.014
And
available upgrades have been checked
1.127
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.010
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
17.101
And
I start Tails from USB drive "__internal" with network unplugged
36.192
And
I enable persistence
6.448
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.696
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.075
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048