And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.654
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.765
And
I accept adding "cowsay" to Additional Software
4.967
And
Additional Software is correctly configured for package "cowsay"
0.759
And
I shutdown Tails and wait for the computer to power off
8.497
And
I start Tails from USB drive "__internal" with network unplugged
38.612
And
I enable persistence
5.619
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.744
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.289
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.044
And
available upgrades have been checked
1.134
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.002
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
17.427
And
I start Tails from USB drive "__internal" with network unplugged
37.792
And
I enable persistence
5.517
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.035
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.529
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052