And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.493
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.046
And
I accept adding "cowsay" to Additional Software
4.940
And
Additional Software is correctly configured for package "cowsay"
0.700
And
I shutdown Tails and wait for the computer to power off
8.054
And
I start Tails from USB drive "__internal" with network unplugged
38.490
And
I enable persistence
5.812
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
11.036
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.024
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.498
And
I can open the Additional Software configuration window from the notification
2.509
And
I shutdown Tails and wait for the computer to power off
22.987
And
I start Tails from USB drive "__internal" with network unplugged
37.926
And
I enable persistence
6.918
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.885
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.106