And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.117
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.307
And
I accept adding "cowsay" to Additional Software
4.887
And
Additional Software is correctly configured for package "cowsay"
0.640
And
I shutdown Tails and wait for the computer to power off
8.640
And
I start Tails from USB drive "__internal" with network unplugged
40.276
And
I enable persistence
6.756
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
12.331
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.250
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.028
And
available upgrades have been checked
1.115
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.961
And
I can open the Additional Software configuration window from the notification
2.556
And
I shutdown Tails and wait for the computer to power off
17.973
And
I start Tails from USB drive "__internal" with network unplugged
40.361
And
I enable persistence
7.916
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
11.996
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.092
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.126