And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.133
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.913
And
I accept adding "cowsay" to Additional Software
4.906
And
Additional Software is correctly configured for package "cowsay"
0.907
And
I shutdown Tails and wait for the computer to power off
8.579
And
I start Tails from USB drive "__internal" with network unplugged
39.900
And
I enable persistence
7.142
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
12.033
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.272
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.019
And
available upgrades have been checked
2.166
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.552
And
I can open the Additional Software configuration window from the notification
2.655
And
I shutdown Tails and wait for the computer to power off
18.169
And
I start Tails from USB drive "__internal" with network unplugged
38.650
And
I enable persistence
6.789
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
10.598
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064