And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.658
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.635
And
I accept adding "cowsay" to Additional Software
4.837
And
Additional Software is correctly configured for package "cowsay"
0.835
And
I shutdown Tails and wait for the computer to power off
4.589
And
I start Tails from USB drive "__internal" with network unplugged
41.018
And
I enable persistence
8.072
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
11.892
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.020
And
available upgrades have been checked
1.186
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.522
And
I can open the Additional Software configuration window from the notification
2.610
And
I shutdown Tails and wait for the computer to power off
18.124
And
I start Tails from USB drive "__internal" with network unplugged
41.290
And
I enable persistence
7.010
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
13.231
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.080
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.105