And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.446
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.634
And
I accept adding "cowsay" to Additional Software
4.954
And
Additional Software is correctly configured for package "cowsay"
0.763
And
I shutdown Tails and wait for the computer to power off
4.285
And
I start Tails from USB drive "__internal" with network unplugged
38.002
And
I enable persistence
6.827
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.206
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.537
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.016
And
available upgrades have been checked
1.123
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.144
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
17.232
And
I start Tails from USB drive "__internal" with network unplugged
36.964
And
I enable persistence
6.989
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.560
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066