And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.239
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.778
And
I accept adding "cowsay" to Additional Software
4.910
And
Additional Software is correctly configured for package "cowsay"
0.709
And
I shutdown Tails and wait for the computer to power off
8.047
And
I start Tails from USB drive "__internal" with network unplugged
37.775
And
I enable persistence
6.937
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
11.367
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.014
And
available upgrades have been checked
2.185
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.484
And
I can open the Additional Software configuration window from the notification
2.577
And
I shutdown Tails and wait for the computer to power off
13.928
And
I start Tails from USB drive "__internal" with network unplugged
38.201
And
I enable persistence
6.377
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.964
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.252
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063