And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.144
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.041
And
I accept adding "cowsay" to Additional Software
4.954
And
Additional Software is correctly configured for package "cowsay"
0.618
And
I shutdown Tails and wait for the computer to power off
8.080
And
I start Tails from USB drive "__internal" with network unplugged
37.661
And
I enable persistence
6.817
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.049
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.014
And
available upgrades have been checked
2.163
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.535
And
I can open the Additional Software configuration window from the notification
2.592
And
I shutdown Tails and wait for the computer to power off
17.555
And
I start Tails from USB drive "__internal" with network unplugged
37.482
And
I enable persistence
6.725
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.354
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055