And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.545
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.074
And
I accept adding "cowsay" to Additional Software
4.822
And
Additional Software is correctly configured for package "cowsay"
0.609
And
I shutdown Tails and wait for the computer to power off
7.845
And
I start Tails from USB drive "__internal" with network unplugged
35.448
And
I enable persistence
6.457
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.107
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.241
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.012
And
available upgrades have been checked
1.135
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.513
And
I can open the Additional Software configuration window from the notification
2.495
And
I shutdown Tails and wait for the computer to power off
22.505
And
I start Tails from USB drive "__internal" with network unplugged
36.531
And
I enable persistence
5.469
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.247
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050