And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.191
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.263
And
I accept adding "cowsay" to Additional Software
3.617
And
Additional Software is correctly configured for package "cowsay"
0.582
And
I shutdown Tails and wait for the computer to power off
2.634
And
I start Tails from USB drive "__internal" with network unplugged
36.382
And
I enable persistence
5.318
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.582
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.018
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.976
And
I can open the Additional Software configuration window from the notification
2.492
And
I shutdown Tails and wait for the computer to power off
17.038
And
I start Tails from USB drive "__internal" with network unplugged
35.627
And
I enable persistence
5.429
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.410
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055