And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.820
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.338
And
I accept adding "cowsay" to Additional Software
3.741
And
Additional Software is correctly configured for package "cowsay"
0.626
And
I shutdown Tails and wait for the computer to power off
7.935
And
I start Tails from USB drive "__internal" with network unplugged
37.034
And
I enable persistence
5.717
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
9.211
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.014
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.389
And
I can open the Additional Software configuration window from the notification
2.501
And
I shutdown Tails and wait for the computer to power off
17.009
And
I start Tails from USB drive "__internal" with network unplugged
35.854
And
I enable persistence
5.267
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.708
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062