And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.547
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.678
And
I accept adding "cowsay" to Additional Software
4.899
And
Additional Software is correctly configured for package "cowsay"
0.686
And
I shutdown Tails and wait for the computer to power off
8.625
And
I start Tails from USB drive "__internal" with network unplugged
39.254
And
I enable persistence
7.240
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
11.922
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.584
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.018
And
available upgrades have been checked
2.214
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.698
And
I can open the Additional Software configuration window from the notification
2.558
And
I shutdown Tails and wait for the computer to power off
23.558
And
I start Tails from USB drive "__internal" with network unplugged
39.890
And
I enable persistence
6.837
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
11.628
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.589
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059