And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.038
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.486
And
I accept adding "cowsay" to Additional Software
3.753
And
Additional Software is correctly configured for package "cowsay"
0.539
And
I shutdown Tails and wait for the computer to power off
7.810
And
I start Tails from USB drive "__internal" with network unplugged
34.816
And
I enable persistence
5.575
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.906
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.014
And
available upgrades have been checked
2.140
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.413
And
I can open the Additional Software configuration window from the notification
2.522
And
I shutdown Tails and wait for the computer to power off
17.341
And
I start Tails from USB drive "__internal" with network unplugged
36.481
And
I enable persistence
5.244
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.302
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066