And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.172
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.503
And
I accept adding "cowsay" to Additional Software
3.619
And
Additional Software is correctly configured for package "cowsay"
0.599
And
I shutdown Tails and wait for the computer to power off
7.853
And
I start Tails from USB drive "__internal" with network unplugged
35.947
And
I enable persistence
6.381
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.183
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.016
And
available upgrades have been checked
1.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.445
And
I can open the Additional Software configuration window from the notification
2.519
And
I shutdown Tails and wait for the computer to power off
18.401
And
I start Tails from USB drive "__internal" with network unplugged
36.356
And
I enable persistence
5.532
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.792
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054