And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.308
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.560
And
I accept adding "cowsay" to Additional Software
4.785
And
Additional Software is correctly configured for package "cowsay"
0.644
And
I shutdown Tails and wait for the computer to power off
8.124
And
I start Tails from USB drive "__internal" with network unplugged
37.794
And
I enable persistence
7.043
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
10.764
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.102
And
the network is plugged
0.017
And
available upgrades have been checked
1.176
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.973
And
I can open the Additional Software configuration window from the notification
2.577
And
I shutdown Tails and wait for the computer to power off
23.003
And
I start Tails from USB drive "__internal" with network unplugged
37.374
And
I enable persistence
6.772
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.869
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.230
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061