And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.986
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.397
And
I accept adding "cowsay" to Additional Software
3.639
And
Additional Software is correctly configured for package "cowsay"
0.584
And
I shutdown Tails and wait for the computer to power off
4.025
And
I start Tails from USB drive "__internal" with network unplugged
35.370
And
I enable persistence
5.202
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
9.306
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.015
And
available upgrades have been checked
2.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.463
And
I can open the Additional Software configuration window from the notification
2.550
And
I shutdown Tails and wait for the computer to power off
22.183
And
I start Tails from USB drive "__internal" with network unplugged
35.427
And
I enable persistence
5.194
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.863
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.012
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065