And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.522
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.753
And
I accept adding "cowsay" to Additional Software
5.019
And
Additional Software is correctly configured for package "cowsay"
0.588
And
I shutdown Tails and wait for the computer to power off
8.171
And
I start Tails from USB drive "__internal" with network unplugged
38.157
And
I enable persistence
6.424
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
11.062
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.031
And
available upgrades have been checked
3.251
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.432
And
I can open the Additional Software configuration window from the notification
2.547
And
I shutdown Tails and wait for the computer to power off
22.676
And
I start Tails from USB drive "__internal" with network unplugged
37.339
And
I enable persistence
7.070
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.658
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051