And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.399
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.533
And
I accept adding "cowsay" to Additional Software
3.599
And
Additional Software is correctly configured for package "cowsay"
0.564
And
I shutdown Tails and wait for the computer to power off
7.955
And
I start Tails from USB drive "__internal" with network unplugged
35.867
And
I enable persistence
5.630
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.496
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.013
And
available upgrades have been checked
1.139
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.521
And
I can open the Additional Software configuration window from the notification
2.573
And
I shutdown Tails and wait for the computer to power off
11.856
And
I start Tails from USB drive "__internal" with network unplugged
35.780
And
I enable persistence
6.378
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.732
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052