And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.601
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.861
And
I accept adding "cowsay" to Additional Software
4.826
And
Additional Software is correctly configured for package "cowsay"
0.712
And
I shutdown Tails and wait for the computer to power off
8.073
And
I start Tails from USB drive "__internal" with network unplugged
38.747
And
I enable persistence
7.030
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
11.349
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.122
And
the network is plugged
0.024
And
available upgrades have been checked
2.215
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.520
And
I can open the Additional Software configuration window from the notification
2.619
And
I shutdown Tails and wait for the computer to power off
23.153
And
I start Tails from USB drive "__internal" with network unplugged
39.161
And
I enable persistence
7.036
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
12.038
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.080
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.115