And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.293
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.524
And
I accept adding "cowsay" to Additional Software
3.670
And
Additional Software is correctly configured for package "cowsay"
0.568
And
I shutdown Tails and wait for the computer to power off
7.793
And
I start Tails from USB drive "__internal" with network unplugged
36.238
And
I enable persistence
5.148
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
9.271
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.017
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.448
And
I can open the Additional Software configuration window from the notification
2.567
And
I shutdown Tails and wait for the computer to power off
17.020
And
I start Tails from USB drive "__internal" with network unplugged
35.516
And
I enable persistence
5.292
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.384
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.155
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092